Is IP67 or IP68 Better For Water Resistance?

IP68 is generally better for water resistance compared to IP67 — Now, these IP67-rated devices are "dust-tight" or "dustproof." and they provide a high level of protection against solid particles, such as dust and dirt. 

This is suitable for environments where dust is a significant concern, such as construction sites. The "7" in IP67 indicates that these devices can withstand temporary immersion in water up to a depth of 1 meter (about 3.3 feet) for up to 30 minutes. This level of water resistance is generally sufficient for everyday situations, including protection against rain and accidental submersion.

Now, IP67, and IP68-rated devices are also "dust-tight" and provide the same level of protection against dust and solid particles BUT the main difference is in the water resistance rating. 

The "8" in IP68 implies a higher degree of water resistance compared to IP67. IP68-rated devices can handle continuous submersion in water at a specified depth (often 1.5 meters or more) for a longer duration, typically exceeding 30 minutes. 

This makes them more suitable for activities like swimming and snorkeling, and they provide better protection in scenarios where the device might be exposed to water for extended periods.

Can You Swim With IP67 Phone?

You can swim with an IP67-rated phone to some extent, but there are limitations to consider. An IP67 rating indicates that the device is dustproof ("6") and can withstand temporary immersion in water up to a depth of 1 meter (about 3.3 feet) for up to 30 minutes ("7").

While this level of water resistance is suitable for accidental submersion or brief exposure to water, it's not designed for extended underwater use or swimming activities. Prolonged submersion or submerging the phone deeper than 1 meter may exceed the IP67 rating's capabilities and potentially lead to water damage.

What IP Rating is 100% Proof?

There is no IP rating that guarantees 100% proof or absolute protection against all conditions. IP ratings are designed to provide a standardized way to describe the level of protection against specific environmental factors, such as dust and water. 

The highest practical IP rating for water resistance in consumer devices is typically IP68, which provides protection against submersion at specified depths for specified durations. Here’s a detailed explanation of an IP68-rated device:

IP68 is an Ingress Protection (IP) rating used to describe the degree of protection provided by an electronic device or enclosure against the intrusion of solid particles (like dust) and water. The IP rating is typically expressed as "IP" followed by two numbers. 

The first digit (6) represents the level of protection against solid particles, such as dust and dirt. In the case of "6," it signifies that the device or enclosure is "dust-tight" or "dustproof." This means that the device is effectively sealed against dust, preventing it from entering the device under normal conditions. 

The second digit (8) represents the level of protection against water ingress. An IP68-rated device can withstand continuous submersion in water beyond 1 meter (about 3.3 feet) for a specified duration without sustaining water damage. 

The specific depth and duration are often defined by the manufacturer but are typically around 1.5 meters (about 5 feet) or more for 30 minutes or longer. The "6" indicates that the device is dust-tight, ensuring that it remains fully protected against dust, dirt, and other solid particles commonly found in various environments.

The "8" implies a high level of water resistance, making IP68-rated devices suitable for use in wet conditions and underwater environments. It can handle activities such as swimming, snorkeling, and exposure to heavy rain. An IP68-rated device can endure exposure to various environmental conditions, such as rain, moisture, and dusty or dirty environments, without suffering damage. 

Is IP64 Waterproof?

An IP64 rating indicates moderate protection against water and dust. 

The "6" in IP64 signifies that the device is dust-tight, offering good protection against dust and solid particles. 

However, the "4" in IP64 means that the device can only withstand splashes of water from any direction but is not fully waterproof.

IP64 is not considered a waterproof rating suitable for submersion or heavy exposure to water. 

It's more appropriate for use in environments where occasional splashes or light rain might occur.

Can IP68 Withstand Heavy Rain?

Yes, an IP68-rated device is generally capable of withstanding heavy rain. 

The "8" in IP68 means that the device can handle temporary immersion in water beyond 1 meter (about 3.3 feet) for a specified duration (usually around 30 minutes). 

This level of water resistance makes IP68-rated devices suitable for use in heavy rain, as well as rainproof in most everyday scenarios.

Let’s Conclude With A Final Question – Is IP68 Rain Proof?

Absolutely, IP68-rated devices are indeed rainproof. You see, that "8" in IP68 is like a golden ticket for water resistance. It means these devices can handle heavy rain, rain showers, and even those surprise downpours without breaking a sweat.

So, imagine you're out and about, exploring the great outdoors, and the heavens decide it's time for a rain dance – no worries! Your IP68-rated smartwatch, for instance, will keep chugging along, no matter how wet it gets.

But here's the best part: it's not just rain. IP68-rated devices are like the superheroes of the tech world. They can handle a lot more than a little drizzle. We're talking about splashes, puddles, and even brief submersion in water. So, whether you're hiking through a rainforest or simply caught in a sudden shower on your way home, your IP68 gadget has your back.

And here's a pro tip: if you're heading out for an adventure and the forecast looks like a raincloud parade, an IP68 device is your trusty sidekick. It'll keep your tech safe and dry while you focus on making memories, rain or shine.